IFF Suspension : Combi Hoist : Combi-Hoist-H160-Ambient-Lighting

Lighting Hoist with a 16m (52'-6") long traveling aluminum connector strip for architectural lighting fixtures

The drive unit and diverter pulley are mounted stationary to the ceiling. The moving section of the hoist is an aluminum connector strip with mounting brackets for architectural lighting fixtures. The brackets are easy to position along the connector strip and designed support down lights. The complete system is under static and dynamic conditions self-sustaining, which makes susceptible mechanical braking systems mandatory and reduces the maintenance requirements to a minimum. The IFF radial winding drums eliminate any risk of cross winding during operation. The House Light Hoist (FF3907) is UL tested and approved as a complete system.

Connector Strip: 16m (52'-6")
Travel: up to 14m (46’)
Lighting circuits: 6
Emergency lighting circuit: optional
Adjustable operating limits
Overload detection
Slack wire detection
Over travel limits
Thermal motor protection
UL / CSA / CE / BGVC1

Motor CE UL (E217891) / CSA 
Power 1.5kW 2.0HP
Voltage 400VAC (3-phase) 208VAC (3-phase)
Lifting speed (average) 9m/min 30FPM
Lifting cable 4mm 7x19 galvanized carbon steel aircraft cable
   
Safety Switches    
Operating limits 2 adjustable limits  
Over travel protection Lower and upper limit (factory preset)
Slack wire detection 1 for each steel cable  
Overload detection 1 for each pick-up point 1 for each steel cable
   
Lighting rail    
Aluminum rail 16m 52'-6"
Lighting circuits 6 6
Emergency lighting circuit Optional Optional
Brackets for lighting fixtures 6 6
   
Mounting brackets    
(5)   FF3907BA-10 Clamp for up to 10mm / 3/8" thick flanges (flange up to 4" wide)
(5)   FF3907BA-16 Clamp for up to 16mm / 5/8" thick flanges (flange up to 4" wide)
(5)   FF3907BB-48 Interface bracket for 4" - 8" wide flange
(5)   FF3907BB-812 Interface bracket for 8" - 12" wide flange
   
Support steel must be in line with the hoist. Please contact IFF for special mounting requirements
Code Max. recommended  Closed height Travel Safe working load Weight    
  installation height          
FF3907P080H160 10.5m 34' 1m 3'-6" 8m 26' 160kg 350Lbs 240kg 530Lbs  
FF3907P095H160 12.0m 39' 1m 3'-6" 9.5m 31' 150kg 330Lbs 240kg 530Lbs  
FF3907P110H160 13.5m 44' 1.1m 3'-8" 11m 36' 135kg 300Lbs 250kg 550Lbs  
FF3907P140H160 17.0m 55' 1.3m 4'-2" 14m 46' 125kg 275Lbs 260kg 575Lbs

Please complete the form below and we'll get back to you as soon as possible.