audio-technica AT898
SUBMINIATURE CARDIOID CONDENSER MICROPHONE
Designed to be worn as a lavalier or hidden in clothing
Offers maximum intelligibility and accurate voice reproduction
Unobtrusive appearance for use in broadcast studios, theatres, etc.
Low frequency roll-off reduces sensitivity to popping
Operates on battery or phantom power
3m cable permanently attached to mic, TA3F connector at power module
AT898
SUBMINIATURE CARDIOID CONDENSER MICROPHONE
Designed to be worn as a lavalier or hidden in clothing, Audio-Technica's discreet-design cardioid AT898 offers maximum intelligibility, accurate voice reproduction and unobtrusive appearance for use in houses of worship, broadcast studios, theaters, etc. Its switchable low-frequency roll-off reduces sensitivity to popping. Battery or phantom power.
- Maximum intelligibility and clean, accurate reproduction for lecturers, stage and television talent, and houses of worship
- Low-profile design (a mere 5 mm in diameter) is ideal for applications requiring minimum visibility
- Operates on battery or phantom power
- Extensive array of provided accessories includes a clothing clip, viper clip, magnet clip and lanyard (black models only), windscreens, interchangeable single and double mic holders
- Accessories available separately
- 9.8' (3.0 m) cable permanently attached to mic, TA3F connector at power module
- Also available as: AT898c - less power module; 55" (1.4 m) cable, unterminated ; AT898cW - less power module; 55" (1.4 m) cable terminated with locking 4-pin connector for Audio-Technica UniPak™ wireless systems
| Element | Fixed-charge back plate permanently polarized condenser |
| Polar Pattern | Cardioid |
| Frequency Response | 200 - 15,000 Hz |
| Open Circuit Sensitivity | Phantom : –43dB (7.0mV), re 1V at 1Pa - Battery : 46dB (5,0mV), re 1V at 1Pa |
| Impedance | Phantom 200 Ω - Battery 250 Ω |
| Maximum Input Sound Level | Phantom: 131 dB SPL, 1 kHz at 1% T.H.D. - Battery: 115 dB SPL, 1 kHz at 1% T.H.D. |
| Low Frequency Roll Off | 80 hz, 12 dB/octave |
| Switches | Flat, roll-off (recessed) |
| Dynamic Range | Phantom: 100dB,1 kHz at max SPL - Battery: 84dB ,1 kHz at max SPL |
| Signal-to-Noise Ratio | 63dB, 1 kHz at 1Pa |
| Phantom Power Requirements | 11- 52V DC, 2 ma typical |
| Battery Type | 1.5V AA-UM3 |
| Battery Current/Life | 0.4 ma typical / 1200 hours (alkaline battery) |
| Weight | Microphone 0.9 g - Power module 102 g |
| Dimensions | Microphone 23.0 mm long, 5.3 mm diameter - Power Module 145.0 mm long, 21.0 mm diameter |
| Output Connector | Integral 3-pin XLRM-type |
| Cable | 3.0 m long (permanently attached to microphone), 2.0 mm diameter, 2-conductor, shielded cable with TA3F output connector that mates with TB3M jack on power module |
| Accessories Included | AT8537 power module; AT8439 cable clip; clothing clip base; viper clip base; magnet clip base and plate with lanyard; three single mic holders; two double mic holders; two windscreens; battery; protective carrying case |
Please complete the form below and we'll get back to you as soon as possible.