audio-technica AT899
SUBMINIATURE OMNIDIRECTIONAL CONDENSER LAVALIER MICROPHONE
Maximum intelligibility and clean, accurate reproduction
Ideal for vocalists, lecturers, stage and television talent, and houses
Low-profile design (a mere 5 mm in diameter)
Operates on battery or phantom power
3m cable permanently attached to mic, TA3F connector at power module
Extensive array of provided accessories
AT899
SUBMINIATURE OMNIDIRECTIONAL CONDENSER LAVALIER MICROPHONE
For interviews, documentary, film and theatre applications. With AT8537 power module and AT899AK accessory kit. Audio-Technica’s omnidirectional AT899 is engineered for intelligible, accurate voice reproduction. Its low-profile design (a mere 5mm in diameter) assures minimum visibility. The mic may be worn as a lavalier and is easily hidden in clothing or hair. It offers the convenience of battery or phantom power; its switchable low-frequency roll-off reduces popping.
- Maximum intelligibility and clean, accurate reproduction for vocalists, lecturers, stage and television talent, and houses of worship
- Low-profile design (a mere 5 mm in diameter) is ideal for applications requiring minimum visibility
- Operates on battery or phantom power
- All models available in either low-reflectance black or beige
- Extensive array of provided accessories includes a clothing clip, viper clip, magnet clip and lanyard (black models only), windscreens, element covers, interchangeable single and double mic holders
- Accessories available separately include complete accessory kits, clothing clips, three-pack element covers and three-pack windscreens
- 9.8' (3.0 m) cable permanently attached to mic, TA3F connector at power module
| Element | Fixed-charge back plate permanently polarized condenser |
| Polar Pattern | Omnidirectional |
| Frequency Response | 20 - 20,000 Hz |
| Open Circuit Sensitivity | Phantom: -43dB (7.0mV), re 1V at 1 Pa - Battery: -46dB (5.0mV), re 1V at 1 Pa |
| Impedance | Phantom 200 Ω - Battery 250 Ω |
| Maximum Input Sound Level | Phantom: 138 dB SPL, 1 kHz at 1% T.H.D. - Battery: 116 dB SPL, 1 kHz at 1% T.H.D. |
| Low Frequency Roll Off | 80 hz, 12 dB/octave |
| Switches | Flat, roll-off (recessed) |
| Dynamic Range | Phantom: 108dB,1 kHz at max SPL - Battery: 86dB,1 kHz at max SPL |
| Signal-to-Noise Ratio | 64dB,1 kHz at 1 Pa |
| Phantom Power Requirements | 11- 52V DC, 2 ma typical |
| Battery Type | 1.5V AA-UM3 |
| Battery Current/Life | 0.4 ma typical / 1200 hours (alkaline battery) |
| Weight | Microphone 0.5 g - Power module 102 g |
| Dimensions | Microphone 16.0 mm long, 5.0 mm diameter - Power Module 145.0 mm long, 21.0 mm diameter |
| Output Connector | Integral 3-pin XLRM-type |
| Cable | 3.0 m long (permanently attached to microphone), 2.0 mm diameter, 2-conductor, shielded cable with TA3F output connector that mates with TB3M jack on power module |
| Accessories Included | AT8537 power module; AT8439 cable clip; clothing clip base; viper clip base; magnet clip base and plate with lanyard; three single mic holders; two double mic holders; two element covers; two windscreens; battery; protective carrying case |
Please complete the form below and we'll get back to you as soon as possible.